How To Enter BIOS On Windows 10 And 11 PCs Without Rebooting

How To Enter BIOS On Windows 10 And 11 PCs Without Rebooting

Hello guys in this article i will tell you How To Enter BIOS On Windows 10 And 11 PCs Without Rebooting.

How To Enter BIOS On Windows 10 And 11 PCs Without Rebooting

Have you ever wondered what happens when you press a button to turn on your computer? 

energy ? run anyway ?not exactly. The short answer is BIOS computer takes over the boot process. Previously, booting a Windows PC and accessing his BIOS required a key press since it was a pre-boot environment.

However, in recent years Microsoft has made it possible to enter the BIOS without restarting the Windows PC.

Whether you want to adjust low-level settings, configure your computer's hardware features, or tighten security, you can enter the BIOS in Windows without rebooting.

So find out which version of Windows you're using and follow the steps below. But before that, let's understand the basics.

What is BIOS?

BIOS stands for Basic Input/Output System and is usually found on a ROM chip on the motherboard. As part of the boot process, it performs hardware initialization via firmware stored in ROM.

The BIOS loads and runs a boot loader (usually your hard drive) that loads and runs your operating system when you turn on your computer. BIOS sets up the device and turns on the operating system.

This is accomplished by providing a set of actions that the operating system can use to perform basic tasks such as reading and writing to disk and communicating with keyboards and monitors. However, some options can physically damage your PC, so be careful when accessing the BIOS.

Is UEFI the same as BIOS?

UEFI stands for Unified Extensible Firmware Interface. Works like BIOS, but stores all boot and configuration information in .efi files instead of firmware files.

This is a new type of his BIOS, which has many advantages over the traditional his BIOS, such as being faster than BIOS, more flexible, and easier to update. Last but not least, UEFI also supports a variety of non-BIOS hardware.

Note: BIOS keys are not the same for all PC manufacturers. It depends on your computer brand.
For example, on newer Dell systems he has to press F2, but on HP F10 and ESC are his BIOS keys.
So I recommend checking the owner's manual or his website for the manufacturer. The splash screen that first appears when you start your computer also contains this information.

However, not all PC and laptop models display this information.

How to access the BIOS on your Windows 11 PC

Getting into the BIOS is now relatively easy, no more guessing by pressing random function keys.

Please follow the instructions below.

1: Open Settings or press "Win Key + I".

2:Click Discipline to go to Payback .

3:Click Advanced Startup.

Note: This step will restart your computer.

4: Go ahead, find the mistakes and click on fix advanced options.

5: Click "UEFI Firmware Settings" Click Reboot.

Since you are not running an older BIOS, boot the Windows 11 UEFI BIOS. There are various ways to access advanced boot options in Windows 11.

How To Enter BIOS On Windows 10 PC Or Any Operating system

There are few changes in the procedure compared to Windows 11. If you are planning to upgrade, the guide is very useful for installing Windows 11.

Follow These Steps.

1: Open Settings or press "Win Key + I".
2: Go to Update and Security.
3: From the Recovery sidebar, find Restart now , Advanced Startup within.

The following steps are the same as for Windows 11.
Select Advanced Startup to access boot options.
STEP4:xD2><3xD2><3xD3><4x4><3xD3><3xD3><3xD3><4xA3>
Find and solve mistakes.

5:Then click on Advanced Options.

6:Click "UEFI Firmware Settings" Click Reboot.

Then Windows will boot with UEFI BIOS and you can get it from there.

Windows BIOS FAQ

1. How can I enter the BIOS without an operating system?

You can access the BIOS every time you restart your computer. You can access the BIOS by simply pressing f12, f8, or delete (del) at the same time to boot your computer.

2. What is UEFI Boot Mode?

UEFI mode configures the system to boot into a UEFI compatible operating system. Legacy BIOS mode, on the other hand, configures the system to run a legacy operating system compatible with Legacy BIOS.

3. Is it possible to open BIOS using Command Prompt in Windows?

yes. , type > CMD, and then type > under Command Prompt. , write "wmic bios get smbiosbiosversion" and enter. This.

Enter Windows BIOS without problems

Enter Windows BIOS without problems

BIOS has been an integral part of all Windows just like windows10 and windows7 since its inception.

Prior to Windows 8, accessing the BIOS was difficult because you had to press a different key for each manufacturer.

The way things are done has changed dramatically and has become much easier. If you've used an older version of Windows before, what key did you press? Let us know in the comments.